Makita LS0714FL Manuel d'instructions télécharger pdf (Page 2)

ENGLISH (Original instructions)

SPECIFICATIONS

Model LS0714/ LS0714F/ LS0714FL/LS0714L

Blade diameter 190 mm

Blade body thickness 1.3 mm - 2.0 mm

Hole (arbor) diameter 20 mm

Max. Miter angle Left 47° , Right 57°

Max. Bevel angle Left 45°, Right 5°

Max. Cutting capacities (H x W) with blade 190 mm in diameter.

Bevel angle

Miter angle

45° (left) 0° 5° (right)

* 45 mm x 265 mm Note1 * 60 mm x 265 mm Note 1

-----

0°

40 mm x 300 mm 52 mm x 300 mm 40 mm x 300 mm

* 45 mm x 185 mm Note2 * 60 mm x 185 mm Note 2

45° (left and right)

40 mm x 212 mm 52 mm x 212 mm

-----

* 60 mm x 145 mm Note 3

57° (right) -----

52 mm x 163 mm

-----

(Note)

* mark indicates that a wood facing with the following thickness is used.

1: When using a wood facing 20 mm thick.

2: When using a wood facing 15 mm thick.

3: When using a wood facing 10 mm thick.

No load speed (min

-1

) 6,000

Laser Type (LS0714FL/L) Red Laser 650 nm, 1mW ( Laser Class 2 )

Dimensions (L x W x H) 670 mm x 430 mm x 458 mm

Net weight LS0714: 13.1 kg, LS0714F: 13.4 kg, LS0714FL: 13.7 kg, LS0714L: 13.5 kg

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END210-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

󺹮 Read instruction manual.

󺹮 DOUBLE INSULATION

󺹮 To avoid injury from flying debris, keep

holding the saw head down, after

making cuts, until the blade has come to

a complete stop.

󺹮 When performing slide cut, first pull

carriage fully and press down handle,

then push carriage toward the guide

fence.

󺹮 Do not place hand or fingers close to the

blade.

󺹮 Never look into the laser beam. Direct

laser beam may injure your eyes.

󺹮 Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

1 2 3 4 5 6 7 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Makita LS0714FL Manuel d'instructions Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à onglets Makita LS0714FL