Makita FS6200 Manuel d'utilisateur télécharger pdf (Page 4)

ENGLISH (Original instructions)

Explanation of general view

1-1. Lock ring

2-1. Locator

3-1. Locator

4-1. Switch trigger

4-2. Lock button

5-1. Lamp

6-1. Reversing switch lever

7-1. Hook

8-1. Lock ring

8-2. Gear housing

9-1. Locator

9-2. Bit

9-3. Gear housing

9-4. Magnetic bit holder

11-1. Lock button

13-1. Lock button

15-1. Swells

15-2. Trapezoidal holes

15-3. Locator holder

SPECIFICATIONS

Model FS4000 FS4200

FS4300/

FS4300A

FS6200

FS6300/

FS6300A

FS6300R

Self drilling screw 6 mm 6 mm 6 mm - - -

Capacities

Drywall screw 5 mm 5 mm 5 mm 4 mm 4 mm 4 mm

No load speed (min

-1

) 0 - 4,000 0 - 4,000 0 - 4,000 0 - 6,000 0 - 6,000 0 - 6,000

Overall length 269 mm 269 mm 279 mm 269 mm 279 mm 279 mm

Net weight 1.3 kg 1.4 kg 1.4 kg 1.4 kg 1.4 kg 1.4 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE033-1

Intended use

The tool is intended for screw driving in wood, metal and

plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model

FS4000,FS4200,FS4300,FS6300,FS6300R

Sound pressure level (L

) : 82 dB(A)

Sound power level (L

) : 93 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model

FS4000,FS4200,FS4300,FS6300,FS6300R

Work mode: screwdriving without impact

Vibration emission (a

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

1 2 3 4 5 6 7 8 9 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Makita FS6200 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Tournevis électriques Makita FS6200