PRODUCTP 1/ 11CONCEPT AND MAIN APPLICATIONSSpecificationStandard equipmentOptional accessoriesModels No.HP330D Description 10.8V Cordless Hammer Drive
Route LED lead wires in Housing set (L) as drawn in Fig. D-3.Fig. D-3Put LED light circuit, facing adhevive-coated side to Change ring side.adhesiveLE
Route lead wires except for LED in Housing L. ( Fig. D-4)Fig. D-4RibLine of ribLine filterPass lead wires (black, red) for DC motor and Switch through
It is not required to lubricate the gear section because the portion is replaced as a factory-assembled gear unit.(1) Set the machine and repairing to
[3] DISASSEMBLY/ASSEMBLY[3] -1. Drill Chuck (cont.)DISASSEMBLINGHex wrench 8Fig. 4Clockwise* recoilforce of machine(2) Remove Drill chuck. (Fig. 4)Cou
[3] DISASSEMBLY/ASSEMBLY[3] -1. Drill chuck (cont.)(3) Set Drill chuck in place. (Fig. 7)ASSEMBLINGHex wrench 8Fig. 7Note: Apply adhesive (ThreeBond 1
[3] DISASSEMBLY/ASSEMBLY[3] -2. Gear assembly, Motor sectionFig. 9DISASSEMBLING(1) Remove Drill chuck. (Figs. 1, 2, 3)Note: It is not required to remo
[3] DISASSEMBLY/ASSEMBLY[3] -2. Gear assembly, Motor section (cont.)ASSEMBLING(1) Assemble Gear assembly to DC motor. (Fig. 10)(2) Assemble Speed chan
[3] DISASSEMBLY/ASSEMBLY[3] -2. Gear assembly, Motor section (cont.)ASSEMBLING(3) Before setting Gear assembly and DC motor, take the following step i
Color index of lead wires' sheathBlackRedRed mark to show plus terminalLED light circuitTerminalSwitchNote: For the countries where Suppression o
Wiring to Terminal Wiring to DC motorHousing L sideHousing set (L) sideDC motor sideHousing LFlag connectors have to be connected to DC motor’s termin
Commentaires sur ces manuels