Makita JV100D Manuel d'instructions

1 ENGLISH (Original instructions) INSTRUCTION MANUAL IMPORTANT: Read Before Using. Cordless Jig SawJV100D 012311

10 2. Circular cuts When cutting circles or arcs of 170 mm or less in radius, install the rip fence as follows. 1234 012330 Insert the rip fence into

11

12 Makita CorporationAnjo, Aichi, Japanwww.makita.com 885079-226

2 ENGLISH (Original instructions) SPECIFICATIONS Model JV100D Length of stroke 18 mm Strokes per minute (min-1) 0 - 2400 Blade type B type Wood 65

3 ENH101-15 For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following

4 15. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery

5 13. Do not operate the tool at no-load unnecessarily. 14. Some material contains chemicals which may be toxic. Take caution to prevent dust inhala

6 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking f

7 CAUTION: • Before installing the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the

8 OPERATION CAUTION: • Always hold the base flush with the workpiece. Failure to do so may cause blade breakage, resulting in a serious injury. • A

9 B) Plunge cutting 012325 You need not bore a starting hole or make a lead-in cut if you carefully do as follows. (1) Tilt the tool up on the fron