Makita LM430D Manuel d'instructions télécharger pdf (Page 7)

012384

To remove the BCV02, press on the hook of the BCV02

and withdraw it with both hands.

Power switch action

WARNING:

• Before inserting the battery cartridge in the

tool, always check to see that the switch lever

actuates properly and returns to the original

position when released. Operating a tool with a

switch that does not actuate properly can lead to

loss of control and serious personal injury.

NOTE:

• Trying to mow much grass at a time may not allow

the motor to start due to the overload. At this time,

change the mowing height to higher level to restart.

• The mower does not start without pressing the

switch button even if the switch lever is squeezed.

This mower is equipped with the interlock switch and

handle switch. If you notice anything unusual with either

of these switches, stop operation immediately and have

them checked by your nearest Makita Authorized

Service Center.

012297

1. Insert the lock key into the interlock switch.

012603

2. Depress the switch button.

3. Pull the switch lever toward you while depressing

the switch button.

4. Release the switch button as soon as the motor

starts running. The mower will continue to run until

you release the switch lever.

5. Release the switch lever to stop the motor.

6. When not in use, remove the lock key. Store the

lock key in a safe place out of reach of children.

Adjusting the mowing height

WARNING:

• Never put your hand or leg under the mower unit

when adjusting the mowing height.

• Always make sure that the lever fits in the groove

properly before operation.

The mowing height can be adjusted in the range of

between 20 mm - 75 mm.

1. Remove the lock key.

012303

2. Pull the mowing height adjusting lever toward

yourself and move it to your desired mowing

height.

Make sure that the protrusion on the mowing height

adjusting lever fits in the groove in the mower.

1. Mowing height

adjusting lever

1. Switch button

2. Switch lever

1. Lock key

1. Battery converter (BCV02)

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Makita LM430D Manuel d'instructions Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Makita LM430D