Makita BLS820 Spécifications télécharger pdf (Page 14)

Adjusting the miter angle

Loosen the grip by turning counterclockwise. Turn the turn

base while pressing down the lock lever. When you have

moved the grip to the position where the pointer points to the

desired angle on the miter scale, securely tighten the grip

clockwise.

CAUTION:

• When turning the turn base, be sure to raise the handle

fully.

• After changing the miter angle, always secure the turn

base by tightening the grip firmly.

Adjusting the bevel angle

To adjust the bevel angle, loosen the lever at the rear of the

tool counterclockwise.

Push the handle to the left to tilt the saw blade until the

pointer points to the desired angle on the bevel scale. Then

tighten the lever clockwise firmly to secure the arm.

CAUTION:

• When tilting the saw blade, be sure to raise the handle

fully.

• After changing the bevel angle, always secure the arm

by tightening the lever clockwise.

• When changing bevel angles, be sure to position the kerf

boards appropriately as explained in the “Positioning kerf

boards” section.

Switch action

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates

properly and returns to the “OFF” position when

released.

• When not using the tool, remove the lock-off button and

store it in a secure place. This prevents unauthorized

operation.

1. Miter scale

2. Turn base

3. Lock lever

4. Pointer

5. Grip

123

001802

1. Lever

1. Arm

2. Bevel scale

3. Pointer

001804

001805

1. Lock-off button

2. Switch trigger

001811

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Makita BLS820 Spécifications Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à onglets Makita BLS820