Makita 6070D Manuel d'instructions télécharger pdf (Page 3)

14.REMOVEADJUSTINGKEYSANDWRENCHES.Formhabitofcheckingtoseethat

keysandadjustingwrenchesareremovedfromtoolbeforeturningit on.

15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on

switch. Be sure switch is OFF when plugging in.

16. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only exten-

sion cords intended for use outdoors and so marked.

17. STAY ALERT. Watch what you are doing, use common sense. Don't operate tool

when you are tired.

18. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that

is damaged should be carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting, and any other conditions that may

affect its operation. A guard or other part that is damaged should be properly

repaired or replaced by an authorized service center unless otherwise indicated

elsewhere in this instruction manual. Have defective switches replaced by autho-

rized service center. Don't use tool if switch does not turn it on and off.

19. GUARD AGAINST ELECTRIC SHOCK, Prevent body contact with grounded sur-

faces. For example: pipes, radiators, ranges, refrigerator enclosures.

20. REPLACEMENT PARTS. When servicing, use only identical replacement parts.

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet,

etc.) be sure the voltage supplied is the same as that specified on the nameplate of the

tool. A power source with voltage greater than that specified for the tool can result in

SERIOUS INJURY to the user-- as well as damage to the tool. If in doubt, DO NOT PLUG

IN THE TOOL. Using a power source with voltage less than the nameplate rating is

harmful to the motor.

1 2 3 4 5 6 7 8 ... 15 16

Pas de commentaire

Makita 6070D Manuel d'instructions Page 3