Makita 4604DW Manuel d'instructions télécharger pdf (Page 6)

ENGLISH

Explanation of general view

1 Charger DC4600

2 Charging light

3 Start button

4 Battery 4600

5 Charging plug

6 Charging connector

7 Restart button

8 Controller C4600

9 Switch

10 Buckle

11 Pilot lamp

12 Waist belt

13 Pocket lid

14 Controller connector

15 Waist belt pocket

16 Suspenders

17 Holster

18 Arm band

19 Connection cord

20 Female plug

21 Switch trigger

22 Lock-off lever

23 Upper shear blade

24 Lower shear blade

25 Branch

26 Hex wrench

27 Blade cover

28 Socket wrench

29 Blade holder

30 Magnet

31 Brush

32 Machine oil

33 Diamond file

SPECIFICATIONS

Model 4604D

Max. cutting capacity ......................... 30 mm in diameter

Overall length ..................................................... 286 mm

Rated voltage ...................................................D.C. 24 V

Net weight

Shears ................................................................ 1.0 kg

Controller C4600 ................................................ 0.3 kg

Battery 4600 ....................................................... 2.0 kg

Charging time ..............................................Approx. 1 hr.

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER & BATTERY

1. SAVE THESE INSTRUCTIONS — This manual

contains important safety and operating instruc-

tions for battery charger.

2. Before using battery charger, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

3. CAUTION — To reduce risk of injury, charge only

MAKITA type rechargeable batteries. Other types

of batteries may burst causing personal injury

and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or sold

by the battery charger manufacturer may result

in a risk of fire, electric shock, or injury to per-

sons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when discon-

necting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise subjected

to damage or stress.

8. Do not operate charger with damaged cord or

plug — replace them immediately.

9. Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in

any way; take it to a qualified serviceman.

10. Do not disassemble charger or battery; take it to

a qualified serviceman when service or repair is

required. Incorrect reassembly may result in a

risk of electric shock or fire.

11. To reduce risk of electric shock, unplug charger

from outlet before attempting any maintenance

or cleaning. Turning off controls will not reduce

this risk.

ADDITIONAL SAFETY RULES FOR CHARGER

& BATTERY

1. Do not charge battery when it or air temperature

is below 10°C (50°F) or above 40°C (104°F).

2. Do not charge or leave battery in a location

exposed to direct sunlight.

3. Do not attempt to use a step-up transformer, an

engine generator or DC power receptacle.

4. Do not allow anything to cover or clog the

charger vents.

5. Do not short the battery:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery in a container with

other metal objects such as nails, coins, etc.

(3) Do not expose battery to water or rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

Always cover the battery terminals with the bat-

tery cover when the battery is not used.

6. Do not incinerate the Battery even if it is severely

damaged or is completely worn out. The battery

can explode in a fire.

7. Be careful not to drop, shake or strike battery.

8. Do not charge inside a box or container of any

kind. The battery must be placed in a well venti-

lated area during charging.

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

Commentaires sur ces manuels

Pas de commentaire

Makita 4604DW Manuel d'instructions Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Makita 4604DW