Makita GD0810C Manuel d'utilisateur télécharger pdf (Page 4)

SERVICE

23.

Tool service must be performed only by

qualified repair personnel. Service or main-

tenance performed by unqualified personnel

could result in a risk of injury.

24.

When servicing a tool, use only identical

replacement parts. Follow instructions in

the Maintenance section of this manual.

Use of unauthorized parts or failure to follow

Maintenance instructions may create a risk of

electric shock or injury.

USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one heavy enough to carry the current your

product will draw. An undersized cord will cause a drop in line voltage resulting in loss of

power and overheating. Table 1 shows the correct size to use depending on cord length and

nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage num-

ber, the heavier the cord.

SPECIFIC SAFETY RULES

USB006-2

DO NOT let comfort or familiarity with product (gained from

repeated use) replace strict adherence to grinder safety rules. If

you use this tool unsafely or incorrectly, you can suffer serious

personal injury.

Accessories must be rated for at least the

speed recommended on the tool warning

label. Wheels and other accessories running

over rated speed can fly apart and cause

injury.

Hold tool by insulated gripping surfaces

when performing an operation where the

cutting tool may contact hidden wiring or

its own cord. Contact with a “live” wire will

make exposed metal parts of the tool “live”

and shock the operator.

Always use safety glasses or goggles.

Ordinary eye or sun glasses are NOT

safety glasses.

Check the wheel carefully for cracks or

damage before operation. Replace

cracked or damaged wheel immediately.

Run the tool at no load for about a minute,

holding tool away from others. If wheel is

flawed, it will likely separate during this

test.

Hold the tool firmly.

Table 1: Minimum gage for cord

Ampere Rating

Volts Total length of cord in feet

120 V 25 ft. 50 ft. 100 ft. 150 ft.

More Than Not More Than AWG

0 6 18 16 16 14

6 10 18161412

10 12 16 16 14 12

12 16 14 12 Not Recommended

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Makita GD0810C Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Makita GD0810C