Makita EA3500F Manuel de l'opérateur Page 5

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 48
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 4
5
Safety precautions for chain saw operators
While operating the chain saw please observe the
following rules:
a) Contact of the guide bar nose with any object
should be avoided.
b) Tip contact may cause the guide bar to move
suddenly upward and backward, which may
cause serious or fatal injury.
c) Always operate the chain saw with both hands.
WARNING!
Read and follow all safety precautions in the
operator’s manual. Failure to follow instructions
could result in serious injury. It is recommended to
lend the chain saw only to people who are expe-
rienced in working with chain saws. Always hand
over the Operator’s and Safety Manual.
WARNING!
This chain saw is capable of severe kickback that
could result in serious injury to the operator. Do
not operate this chain saw unless you have ex-
traordinary cutting needs and experience in and
special training for dealing with kickback. Chain
saws with signicantly reduced kickback potential
are available.
WARNING!
Kickback may occur when the nose or tip of the
guide bar touches an object, or when the wood
closes in and pinches the saw chain in the cut.
This contact may abruptly stop the saw chain and
in some cases may cause a lightning fast reverse
reaction, kicking the guide bar up and back towards
the user, or push the guide bar back towards the
operator. Kickback may cause you to lose control
of the saw.
As a chain saw user, you can take several steps to
reduce the risk of a kickback and potential injury.
A. With a basic understanding of kickback, you
can reduce or eliminate the element of sur-
prise. It is a sudden surprise that contributes
to accidents.
B. Keep a good rm grip on the saw with both
hands, your right hand on the rear grip and
your left hand on the tubular handle, when the
engine is running. Use a rm grip with thumbs
and ngers encircling the chain saw handles. A
rm grip can neutralize kickback and help you
maintain control of the saw. Don’t let go!
C. Make sure that the area in which you are cut
-
ting is free from obstructions. Do not let the
nose of the guide bar contact the log, branch,
or any other obstructions which could be hit
while you are operating the saw.
D. Do not overreach or cut above shoulder
height.
E. Follow manufacturer’s sharpening and main-
tenance instructions for the saw chain.
F. Only use replacement bars and chains speci-
ed by the manufacturer or the equivalent.
Additional safety precautions
The following additional safety precautions must be
observed by all users of chain saws:
1. Do not operate a chain saw when you are fatigued.
2. Use safety footwear; snug-tting clothing; protec
-
tive gloves; and eye, hearing, and head protection
devices.
3. Use caution when handling fuel. Move the chain
saw at least 10 feet (3 m) from the fueling point
before starting the engine.
4. Do not allow other persons to be near the chain saw
when starting or cutting with the chain saw. Keep
bystanders and animals out of the work area.
5. Do not start cutting until you have a clear work
area, secure footing, and a planned retreat path
from the falling tree.
6. Keep all parts of your body away from the saw
chain when the engine is running.
7. Before you start the engine, make sure that the
saw chain is not contacting anything.
8. Carry the chain saw with the engine stopped, the
guide bar and saw chain to the rear, and the mufer
away from your body.
9. Do not operate a chain saw that is damaged,
is improperly adjusted, or is not completely and
securely assembled. Be sure that the saw chain
stops moving when the throttle control trigger is
released.
10. Shut off the engine before setting it down.
11. Use extreme caution when cutting small size brush
and saplings because slender material may catch
the saw chain and be whipped toward you or pull
you off balance.
12. When cutting a limb that is under tension be alert
for springback so that you will not be struck when
the tension on the wood bers is released.
13. Keep the handles dry, clean, and free of oil or fuel
mixture.
14. Operate the chain saw only in well-ventilated
areas.
15. Do not operate a chain saw in a tree unless you
have been specically trained to do so.
16. All chain saw service, other than the items listed
in the operator’s manual maintenance instructions,
should be performed by MAKITA. (For example,
if improper tools are used to remove the ywheel
or if an improper tool is used to hold the ywheel
in order to remove the clutch structural damage to
the ywheel could occur and could subsequently
cause the ywheel to burst.)
17. When transporting your chain saw, use the chain
protection cover.
18. Low kickback bars and low kickback chains are
designed to reduce the risk of kickback injury. Ask
your MAKITA dealer about these devices.
Vue de la page 4
1 2 3 4 5 6 7 8 9 10 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Makita BPB180 podręczniki

Instrukcje obsługi i podręczniki użytkownika dla Akumulatorowe piły łańcuchowe Makita BPB180.
Dostarczamy 1 pdf podręczników Makita BPB180 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika


Makita BPB180 Instrukcja Użytkownika (52 strony)


Marka: Makita | Kategoria: Cordless chainsaws | Rozmiar: 1.30 MB |

       

Spis treści

1 014183 2 012128

2

3 007147 4 007148

2

5 007149 6 007299

2

7 006192 8 006193

2

9 007151 10 007316

3

11 004747 12 007301

3

13 007298 14 004750

3

15 001145 16 007302

3

Explanation of general view

4

IMPORTANT SAFETY

5

INSTRUCTIONS

5

FOR BATTERY CARTRIDGE

5

SAVE THESE INSTRUCTIONS

5

FUNCTIONAL DESCRIPTION

5

ASSEMBLY

6

OPERATION

6

OPTIONAL ACCESSORIES

7

Descriptif

8

ASSEMBLAGE

10

UTILISATION

10

MAINTENANCE

11

ACCESSOIRES FOURNIS EN

11

ENG901-1

12

ENH101-16

12

DEUTSCH (Originalanweisungen)

13

(Abb. 1)

14

Akku-Schutzsystem

14

SONDERZUBEHÖR

16

ENG905-1

17

ENG900-1

17

ENE009-1

18

GEA010-1

18

GEB065-2

18

(Fig. 1)

19

MONTAGGIO

20

FUNZIONAMENTO

20

MANUTENZIONE

21

ACCESSORI OPZIONALI

21

WAARSCHUWING Lees alle

23

(zie afb. 1)

24

Accubeveiligingssysteem

24

ONDERDELEN AANBRENGEN/

25

VERWIJDEREN

25

BEDIENING

25

ONDERHOUD

26

VERKRIJGBARE ACCESSOIRES

26

Explicación de los dibujos

28

ENC007-8

29

MANTENIMIENTO

31

ACCESORIOS OPCIONALES

31

Descrição geral

33

MONTAGEM

35

FUNCIONAMENTO

35

MANUTENÇÃO

36

ACESSÓRIOS OPCIONAIS

36

DANSK (Originalvejledning)

38

VIGTIGE

39

SIKKERHEDSINSTRUKTIONER

39

FOR BATTERIPAKKEN

39

GEM DISSE INSTRUKTIONER

39

FUNKTIONSBESKRIVELSE

39

MONTERING

40

BETJENING

40

VEDLIGEHOLDELSE

41

EKSTRAUDSTYR

41

Περιγραφή γενικής όψης

42

Σύστημα προστασίας μπαταρίας

43

ΣΥΝΑΡΜΟΛΟΓΗΣΗ

44

ΛΕΙΤΟΥΡΓΙΑ

45

ΣΥΝΤΗΡΗΣΗ

45

ΠΡΟΑΙΡΕΤΙΚΑ ΑΞΕΣΟΥΑΡ

45

TÜRKÇE (Orijinal talimatlar)

47

ÖNEMLİ GÜVENLİK

48

TALİMATLARI

48

AKÜ İÇİN

48

BU TALİMATLARI SAKLAYIN

48

KULLANIMA İLİŞKİN TANIMLAR

48

ÇALIŞTIRMA

49

OPSİYONEL AKSESUARLAR

50

Makita Corporation

52





Więcej produktów i instrukcji dla Akumulatorowe piły łańcuchowe Makita

Modele Rodzaj dokumentu
BJR141 Instrukcja Użytkownika        BJR141 - Makita, 52 strony
4333D Instrukcja Użytkownika        12 V 4331D 14.4 V 4333D [en] , 84 strony
4334 Instrukcja Użytkownika        4334D - Makita, 88 strony
BSS611 Instrukcja Użytkownika       BSS610 BSS611, 60 strony
4350FCT Instrukcja Użytkownika        4350T 4350CT 4350FCT, 48 strony
BHS630 Instrukcja Użytkownika   Repair - Makita, 16 strony
LC1230 Instrukcja Użytkownika        LC1230 - Makita, 52 strony
LS0714FL Instrukcja Obsługi    Makita LS0714FL Instruction manual, 31 strony
JR140D Instrukcja Użytkownika     JR140D - Makita, 13 strony
4351CT Instrukcja Obsługi     Makita 4351CT Instruction manual, 28 strony
5091DZ Instrukcja Obsługi   Makita 5091DZ Instruction manual, 76 strony
VJ01 Instrukcja Użytkownika         GB Cordless Jig Saw Instruction Manual F Scie, 60 strony
JR102D Instrukcja Obsługi    Makita JR102D Instruction manual, 28 strony
4350FCT Instrukcja Użytkownika     4350T 4350CT 4350FCT, 48 strony
BJR182 Instrukcja Użytkownika      BJR181 BJR182, 44 strony
BHS630 Instrukcja Użytkownika      BHS630 - Makita, 68 strony
4350CT Instrukcja Użytkownika       Инструкция Makita 4350CT, 54 strony
4351T Instrukcja Użytkownika      4351T 4351CT 4351FCT, 52 strony
4350T Instrukcja Obsługi    Makita 4350T Instruction manual [en] , 28 strony
BSS610 Instrukcja Użytkownika       BSS610 BSS611, 68 strony