Makita DML801X1 Manuel d'utilisation et d'entretien télécharger pdf (Page 6)

around you.

• Do not use force when inserting the battery

cartridge. If the cartridge does not slide in easily, it

is not being inserted correctly.

Adjusting depth of cut

007524

CAUTION:

• After adjusting the depth of cut, always tighten the

lever securely.

Loosen the lever on the side of the rear handle and

move the base up or down. At the desired depth of cut,

secure the base by tightening the lever.

For cleaner, safer cuts, set cut depth so that no more

than one blade tooth projects below workpiece. Using

proper cut depth helps to reduce potential for dangerous

KICKBACKS which can cause personal injury.

Sighting

007525

When cutting, align the A position on the front of the

base with your cutting line on the workpiece.

Switch action

007526

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger

actuates properly and returns to the "OFF" position

when released.

• Do not pull the switch trigger hard without pressing

the lock-off lever. This can cause switch breakage.

To prevent the switch trigger from being accidentally

pulled, a lock-off lever is provided. To start the tool,

press the lock-off lever and pull the switch trigger.

Release the switch trigger to stop.

WARNING:

• For your safety, this tool is equipped with lock-off

lever which prevents the tool from unintended

starting. NEVER use the tool if it runs when you

simply pull the switch trigger without pressing the

lock-off lever. Return tool a MAKITA service center

for proper repairs BEFORE further usage.

• NEVER tape down or defeat purpose and function

of lock-off lever.

Electric brake

This tool is equipped with an electric blade brake. If the

tool consistently fails to quickly stop blade after switch

trigger release, have tool serviced at a Makita service

center.

The blade brake system is not a substitute for lower

guard. NEVER USE TOOL WITHOUT A FUNCTIONING

LOWER GUARD. SERIOUS PERSONAL INJURY CAN

RESULT.

Lighting the lamp

007527

CAUTION:

• Do not look in the light or see the source of light

directly.

Only to turn on the light, pull the switch trigger without

pressing the lock-off lever. To turn on the light and run

the tool, press the lock-off lever and pull the switch

trigger with the lock-off lever being pressed.

1. Lamp

1. Switch trigger

2. Lock-off lever

1. A position

2. Cutting line

3. Base

1. Lever

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Makita DML801X1 Manuel d'utilisation et d'entretien Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Makita DML801X1