Makita 5201NA Manuel d'utilisateur télécharger pdf (Page 2)

ENGLISH

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

GENERAL SAFETY RULES

USA001-2

(For All Tools)

WARNING:

Read and understand all instructions.

Failure to follow all instructions listed below,

may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

1. Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away

while operating a power tool. Distractions can

cause you to lose control.

Electrical Safety

4. Grounded tools must be plugged into an outlet

properly installed and grounded in accordance

with all codes and ordinances. Never remove the

grounding prong or modify the plug in any way.

Do not use any adaptor plugs. Check with a qual-

ified electrician if you are in doubt as to whether

the outlet is properly grounded. If the tools should

electrically malfunction or break down, grounding

provides a low resistance path to carry electricity

away from the user.

5. Avoid body contact with grounded surfaces

such as pipes, radiators, ranges and refrigera-

tors. There is an increased risk of electric shock if

your body is grounded.

6. Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

7. Do not abuse the cord. Never use the cord to

carry the tools or pull the plug from an outlet.

Keep cord away from heat, oil, sharp edges or

moving parts. Replace damaged cords immedi-

ately. Damaged cords increase the risk of electric

shock.

8. When operating a power tool outside, use an

outdoor extension cord marked “W-A” or “W”.

These cords are rated for outdoor use and reduce

the risk of electric shock.

Personal Safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use tool while tired or under the influence of

drugs, alcohol, or medication. A moment of inat-

tention while operating power tools may result in

serious personal injury.

10. Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, cloth-

ing, and gloves away from moving parts. Loose

clothes, jewelry, or long hair can be caught in mov-

ing parts.

11. Avoid accidental starting. Be sure switch is off

before plugging in. Carrying tools with your finger

on the switch or plugging in tools that have the

switch on invites accidents.

12. Remove adjusting keys or wrenches before turn-

ing the tool on. A wrench or a key that is left

attached to a rotating part of the tool may result in

personal injury.

13. Do not overreach. Keep proper footing and bal-

ance at all times. Proper footing and balance

Model 5201NA

Blade diameter 260 mm (10-1/4”)

Max. Cutting depth

at 90° 97 mm (3-3/4”)

at 45° 64 mm (2-1/2”)

No load speed (RPM) 3,700/min.

Overall length 445 mm (17-1/2”)

Net weight 8.3 kg (18.3 lbs)

1 2 3 4 5 6 7 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Makita 5201NA Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Makita 5201NA