Makita LS1220 Spécifications télécharger pdf (Page 4)

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet,

etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool.

A power source with voltage greater than that specified for the tool can result in SERIOUS

INJURY to the user - as well as damage to the tool. If in doubt, DO NOT PLUG IN THE

TOOL. Using a power source with voltage less than the nameplate rating is harmful to the

motor.

USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one heavy enough to carry the current your

product will draw. An undersized cord will cause a drop in line voltage resulting in loss of

power and overheating. Table 1 shows the correct size to use depending on cord length and

nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage num-

ber, the heavier the cord.

ADDITIONAL SAFETY RULES

USB037-2

DO NOT let comfort or familiarity with product (gained from

repeated use) replace strict adherence to miter saw safety rules.

If you use this tool unsafely or incorrectly, you can suffer seri-

ous personal injury.

Wear eye protection.

Keep hands out of path of saw blade.

Avoid contact with any coasting blade. It

can still cause severe injury.

Do not operate saw without guards in

place.

Do not perform any operation freehand.

The workpiece must be secured firmly

against the turn base and guide fence with

a vise during all operations. Never use

your hand to secure the workpiece.

Never reach around saw blade.

Turn off tool and wait for saw blade to

stop before moving workpiece or chang-

ing settings.

Unplug tool before changing blade or ser-

vicing.

Always secure all moving portions before

carrying the tool.

Do not use the tool in the presence of

flammable liquids or gases.

Table 1: Minimum gage for cord

Ampere Rating

Volts Total length of cord in feet

120 V 25 ft. 50 ft. 100 ft. 150 ft.

More Than Not More Than AWG

0 6 18 16 16 14

6 10 18161412

10 12 16 16 14 12

12 16 14 12 Not Recommended

1 2 3 4 5 6 7 8 9 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Makita LS1220 Spécifications Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à onglets Makita LS1220