Makita LS1220 Spécifications télécharger pdf (Page 7)

INSTALLATION

Bench mounting

When the tool is shipped, the handle is locked in the lowered

position by the stopper pin. Release the stopper pin by lower-

ing the handle slightly and pulling the stopper pin.

This tool should be bolted with four bolts to a level and stable

surface using the bolt holes provided in the tool’s base. This

will help prevent tipping and possible injury.

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Blade guard

When lowering the handle, the blade guard rises automati-

cally. The guard is spring loaded so it returns to its original

position when the cut is completed and the handle is raised.

NEVER DEFEAT OR REMOVE THE BLADE GUARD OR

THE SPRING WHICH ATTACHES TO THE GUARD.

In the interest of your personal safety, always maintain the

blade guard in good condition. Any irregular operation of the

blade guard should be corrected immediately. Check to

assure spring loaded return action of guard. NEVER USE

THE TOOL IF THE BLADE GUARD OR SPRING ARE DAM-

AGED, FAULTY OR REMOVED. DOING SO IS HIGHLY

DANGEROUS AND CAN CAUSE SERIOUS PERSONAL

INJURY.

1. Stopper pin

001794

1. Bolt

001827

1. Blade guard

001830

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

Makita LS1220 Spécifications Page 7