Makita LS1220 Spécifications télécharger pdf (Page 12)

To remove the blade, use the socket wrench to loosen the

hex bolt holding the center cover by turning it counterclock-

wise. Raise the blade guard and center cover.

Press the shaft lock to lock the spindle and use the socket

wrench to loosen the hex bolt clockwise. Then remove the

hex bolt, outer flange and blade.

To install the blade, mount it carefully onto the spindle, mak-

ing sure that the direction of the arrow on the surface of the

blade matches the direction of the arrow on the blade case.

Install the outer flange and hex bolt, and then use the socket

wrench to tighten the hex bolt (left-handed) securely counter-

clockwise while pressing the shaft lock.

Return the blade guard and center cover to its original posi-

tion. Then tighten the hex bolt clockwise to secure the center

cover. Release the handle from the raised position by pulling

the stopper pin. Lower the handle to make sure that the

blade guard moves properly. Make sure shaft lock has

released spindle before making cut.

1. Center cover

2. Socket wrench

001828

1. Shaft lock

2. Socket wrench

001829

1. Hex bolt

2. Outer flange

3. Saw blade

4. Ring

5. Inner flange

6. Spindle

1. Blade case

2. Arrow

3. Saw balde

4. Arrow

001791

2 1 4 3

001785

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Pas de commentaire

Makita LS1220 Spécifications Page 12